Hope this helps ya.. Cobra.. :-)
Belt-Minder® Deactivating/Activating
Vehicles Built After 5/27/03
Preparation
Deactivating/Activating
For the seating
position being disabled, buckle then unbuckle the safety belt 9 times, ending
with the safety belt unbuckled.
Within 10 seconds of the safety belt warning indicator
turning on, buckle then unbuckle the safety belt.
Vehicles Built Prior To 5/27/03
Preparation
Deactivating/Activating
Buckle then unbuckle the safety belt 3 times,
ending with the safety belt unbuckled. This portion of the procedure can be done
before or during belt minder warning activation.
The solution posted by cobra777 is also listed in your owners manual starting on page 117.
If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
SOURCE: How to disable the speed linked seat belt buzzer in my 2007 camry
Your dealer will use their scan tool to interface with your vehicle; that will disable the speed link. I provide this service at no charge.
SOURCE: Turn the seat belt buzzer off
Usually what I do is reroute the seatbelt behind my seat, or buckle the seat belt prior to sitting. Unless you want to rewire the sensor with a toggle switch if you have any electrical knowledge. Hope this helps.
SOURCE: SEAT BELT BUZZER WHERE IS IT
does it do it on the driver side? hook it up without sitting in the seat start the rig if the buzzer is on sit in the seat if it is still on you have a bad ground on the seatbelt side the short belt that it connects to. the buzzer is under the dash driver side above the sterring wheel.
SOURCE: how to get seat belt buzzer to quit ringing when
should be a switch under the seat, disconnect the wire. Or find the buzzer and disconnect it
641 views
Usually answered in minutes!
×