Hi,
The issue you are having is with the power latch assembly. This system has multiple items and sensors related to its operation and even has its own control module (computer) that will set codes if there is a problem such as what you are having. The only way to be 100% sure is to check the power liftgate control module with a scanner capable of accessing it. What I have found to be the most common problem is the power rear latch in the lift gate that actually closes the rear hatch in the last few inches on movement and it issues that it it latched in place. You will need to replace the power liftgate latch assembly.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
I REPLACED LIFTGATE POWER LATCH ASSY ALREADY AS I SAID LAST TIME . THERE NO BODY FUALT CODES AND BODY MODULE WILL LOCK AND UNLOCK BUT I CANT GET IT TO OPEN LIFT MOTOR STARTS FOR A SEC THEN STOPS
Thanks for your response!!
I was looking at the service manual for the power liftgate, and there
are a lot of cut-off switches that can cause the liftgate motor to stop
or not operate at all. On both sides of the liftgate are those
elongated plastic pressure switch that senses obstruction when closing,
that can stop the motor.
For that temperature related motor not working >>>> it might
be the chime/thermistor switch that disables the motor. It is built
together with the chime buzzer, which is located inside in the rear
plate light assembly. Try to remove the rear plate bar assembly to
assess the chime/thermistor . . . test it if working, i.e. heat it with a
hair dryer and test the lift gate if it will operate. The thermistor
switch resistance increases with heat. The power liftgate control
module operates when the thermistor resistance is within the preset
range.
Let me know,once you would check all this.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice
day!!
×
651 views
Usually answered in minutes!
×