Turn the ignition to on but do not start the truck.
Press the gas
pedal 3 times within 5 seconds.
Turn key to off. It should be
reset.
If not, try again. Good luck.
To reset the oil life monitor and get rid of the "Change oil Soon" message turn the key to accessory (engine off) and press the gas pedal fully three times in a row. It sometimes takes a few attempts but will reset the light.
Turn the key on,and press the gas pedal three times slow,within five seconds
SOURCE: oil pan removal on 2002 gmc sierra
did you pull the rubber plugs between the motor and trans out? there are either nuts or bolts up there
SOURCE: LOW OIL PRESSURE ON 2007 GMC SIERRA 1500. CHANGED
have it tested using a manual gage if still low then main baring ore most likely bad that would mean a over hall if is really low and bearings bad should be making rattle noise when started up first few seconds
Testimonial: "thanks alot.truck is not making a rattling noise.we did check it with a manual gauge.it read about 10 at idol. press. gets better as you incr speed"
575 views
Usually answered in minutes!
×