Indicators, hazzards,do not work on drivers side,passengers side is perfect,checked bulbs are perfect,known problem in focuas,please help thanks bryan

There could be several reasons why the driver side headlight on your 2007 Pontiac G6 is not working. Some possible causes include a blown headlight bulb, a faulty headlight relay, or a problem with the headlight wiring. It's also possible that the issue is related to the turn signal, as you mentioned that it was staying on. I would recommend checking the headlight bulb first. If it is blown, replace it with a new one. If the bulb is fine, the issue may be with the headlight relay or wiring. You can also check the turn signal switch or the multifunction switch, which controls the turn signals and headlight. It may be possible that the switch is defective or malfunctioning. It would be best to get the vehicle inspected by a professional mechanic to determine the cause of the problem and make the necessary repairs.

Check for a bad ground connection.

The fuse is common to both sides, so it won't be that.
Check bulb and wiring for issues.

Check bulbs first by switching same bulb from other side of vehicle

It is as simple as your hazzard switch needs to be replaced yes your hazzard switch as now turn signals are built threw the hazzard switch my PT Cruiser had same problem as my s10 replaced hazzard switch fixed the problem

Check the bulbs and replace the flasher can.

Bad earth connection.Clean or replce wire.

have someone turn on the turn signal then someone check to see if there is power at the bulb socket in the front and rear of vehicle. if there is not check the flasher, if thats not it then check the wiring. you should also call the dealer and ask it may be a common mistake in thier wiring harness.

CHANGE THE SOCKET FOR THE BULB THATS FAILED ALSO CHECK THE TAIL LAMP ASSY, THE CONECTOR ON THE LAMP MAY BE DISTORTED AND NO CONTACT TO THE SOCKET.

Ok man, i don't if that helps you, but when i tried it in my 1989 peugeot 205.
Try this: put on the hazzard lights and that will test some of the brake light circuit.