-
Dodge Master
2,993 Answers
- Posted on May 24, 2010
Re: How do you change a heater blower moter in a 1998...
Removal & Installation
The blower motor is located behind the glovebox, behind the blower motor cover
-
Disconnect and isolate the negative battery cable, then wait 2 minutes before proceeding with the removal. This will effectively disable the air bag system preventing possible personal injury.
-
Remove the glove box from the instrument panel.
-
Remove the A/C-heater blower motor cover.
-
Disconnect the blower motor wiring connector.
-
Remove the blower motor wiring grommet and feed the wiring through the blower motor housing.
-
Remove the blower motor mounting screws.
how do you change a heater blower moter in a 1998 - b4976b0.gifg src="/uploads/images/b4976b0.gif" alt="b4976b0.gif" class="h_mi" />
Once the cover is removed, unplug the electrical connector and push ihow do you change a heater blower moter in a 1998 - 31d76b2.gifhe opening in the housing
The blower motor is secured to the housing with three small screws
-
Allow the blower motor assembly to drop downward to clear the instrument panel and remove from vehicle.
To install:
-
Place the blower motor assembly into position on the A/C-heater unit and tighten the mounting screws.
-
Route the blower motor wiring through the blower motor housing and seat the wiring grommet in the hole of the blower motor housing.
-
Reconnect the blower motor electrical connector.
-
Install the A/C-heater blower motor cover.
-
Install the glove box into the instrument panel.
-
Reconnect the negative battery cable. Check blower motor operation.
×