-
Chrysler Master
2,993 Answers
- Posted on May 24, 2010
Re: I need to remove my power steering pump on a 2004...
So you have done all this so far?
-
Disconnect and isolate battery negative cable from battery post.
-
Siphon power steering fluid from pump reservoir.
-
Remove air cleaner housing and inlet tube to throttle body.
-
Remove serpentine drive belt.
-
Remove hose clamp, then supply hose from pump.
-
Unthread tube nut, then remove pressure hose from pump.
-
Remove three pump mounting bolts through access holes in pulley.
-
Remove pump from engine bracket.
-
If pulley needs removal
×