1984 Chevrolet Truck S10 P/U
4WD 2.8L 2BL 6cyl the Fuel Filter is located under hood, center, upper engine area, front of
carburetor, mounted in fuel line.
First, release the fuel pressure by opening the fuel filler door. Then
you replace it by squeezing the quick release plastic clip on the front
and sliding the fuel line forward; you then use a wrench to loosen the
nut on the back. Be prepared for some gas spillage with a container or
some old rags. Once it is loosened, you remove it from its bracket,
replace it, hook it back up (reverse of what you did) and it should be
good to go.
Good luck.
697 views
Usually answered in minutes!
×