2005 Chevrolet TrailBlazer Logo
Posted on May 17, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How do you replace the glass in the driver side mirro?

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Expert 241 Answers
  • Posted on May 18, 2010
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Jan 02, 2009
Answers
241
Questions
0
Helped
149999
Points
763

Try Pep Boys or Autozone for a replacement mirror glass. They come in many different sizes cut to fit many different mirrors. Get one that is the same size as your old one, peal off the back sticky tape, and stick it onto the broken mirror glass if it's still there. No need to replace the entire mirror.

3 Related Answers

Terry Engel

  • 176 Answers
  • Posted on Dec 31, 2008

SOURCE: driver side mirro is hot

If your car had the option of heated side view mirrors, your relay/timer is not working properly, hte only real damage that can occur is the timer/realy will eventually burn out

Ad

Anonymous

  • 1986 Answers
  • Posted on Sep 29, 2009

SOURCE: driver side mirror 2004 Pontiac Grand Am

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Anonymous

  • 1986 Answers
  • Posted on Sep 29, 2009

SOURCE: Replacing drivers side rear view mirro in Mitsubishi Galant 1997

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Where can i find a side mirror fuse

if both mirroes are not working check fuse, also make sure the steering is not working, they are in the same circuit. fuse box in the engine compartment drivers side.
1helpful
2answers

Mercedes w210 2001 wing mirror dissmantel to replace glass

Hi, Fold mirror in towards car and you will see an inspection hole at the bottom left of the end of the mirror housing. Insert a flat blade screwdriver into the hole and press against a small metal clip. you will feel the clip move and the housing will then slide off allowing you to unclip the glass
3helpful
1answer

Replace drivers side mirror 2001 chevy tahoe,mirror only

To just replace the mirror glass there are a few different styles, but they all pull off. I suggest you wear gloves and glasses. Get a grip behing the glass and pull out. You should see a round circular bracket in the center. The new mirror just snaps into the bracket. Center new mirror and push evenly in the center of glass until it snaps into place. Dont push in by holding the edges, you'll break it. If you don't see the circle or it comes off with the glass it was too damaged for just glass. Power or manual mirros differ inside, but the mirror replacement is the same. If you mean the entire mirror only, remove door panel. Lower window, remove electrical connector if power, remove 3 bolts attaching mirror to door. Remove.
0helpful
1answer

1999 LeSabre, had the drivers side view mirror knocked off... How do you replace it? Do I need to take the door pannel off? mirroe is electric but not heated. Thanks

yes you need to remove the door panel,but you can just let it hang no need unhooking any wires,there is only two nuts holding the mirror fast.
3helpful
1answer

How do you replace the driver side mirror glass on a 2003 dodge ram 2500?

To replace the driver side mirror glass only, Grasp the side view glass only and pull off carefully. It is attached with clips and should come off pretty easy. Install new glass, lining up the clips and carefully push in. It is recommended you use a towel cloth over the glass for cushion and safety.
0helpful
1answer
0helpful
1answer

Passenger side mirroe is broken from the neck...

is it just the glass that broke?

Exterior Mirror Glass Removal
  1. Position the inner edge or the exterior rear view mirror glass to its maximum travel.
  1. s1h~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Place a shop towel between the exterior rear view mirror glass and the hand to avoid personal injury in the instance of glass breakage.
    Grasp the outboard edge of the exterior rear view mirror glass and pull outward.
  1. Remove the exterior rear view mirror glass.
    • If equipped, disconnect the heated rear view mirror glass electrical connectors.
Installation
  1. If equipped, connect the heated rear view mirror glass electrical connectors.
  1. NOTE: An audible click will be heard during installation.
    Press firmly in the center of the exterior rear view mirror glass until it snaps onto the exterior rear view mirror motor.
6helpful
1answer

Replacing drivers side rear view mirro in Mitsubishi Galant 1997

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
0helpful
2answers

Driver side mirro is hot

it is a heated mirror. usually comes on with defroster setting
3helpful
1answer

Driver side mirror 2004 Pontiac Grand Am

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Not finding what you are looking for?

203 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29490 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...