2003 jaguar s type what does p 1000 code mean

Hello
it simply means that the OBD-II monitor testing is not complete , ML might come on , but really it has no other effect

not enough information to be certain but if it is a jaguar x type then code p 1000 refers to engine control module (ECM)--- internal error ===causes---ECM
get a known good loan ECM and interchange it and if that fixes the fault get a new one or one from the wreckers

Type your code in at google with your type of car.

the p1000 is a system readiness code meaning the car is checking itself..it means its not finished etc but once it has the code will change to p1111..meaning system check completed, the c1165 is a abs or wheel speed code, check the wheel where this code is originating

It a engine code for tourqe convetor clutch circuit malfunction

Hi
The car is looking for you to enter the security (anti-theft) code for the radio.
If power is removed (battery disconnected), radio assumes it has been taken from the car and protects itself by means of security code. You should have a small ( credit card size ) security card with the radio code written on it. The instructions for entering the code is in your owners manual.

Regards
Martin

Could be all sorts of things, you need to get the code read when it illuminates, most good service stations can do this for you at minimal cost. Once you have the code you can look up the problem on http://www.bluejag.co.uk

You might check this site out for Jag codes. Oxygen sensors can be a sticky job, they're screwed into exhaust and can literally weld themselves in place. Plus in most cases you need special wrench/socket to get around the sensor. (they can be a real pain)

http://www.obd-codes.com/

It shows that your fault management system has been recently reset. It will not bring on the engine management light. For more info on fault codes goto
http://www.bluejag.co.uk/

You can check the fault code meanings at http://www.bluejag.co.uk/ this should give you an idea of repair costs