At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Clanking could mean you have a worn out rod bearing take it to a shop and let them have a listen..you shouldnt drive this car in this condition, it might cause even more damage if you continue to drive it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like the starter. The single clank sound could be the solenoid slamming into position, but then it's not turning. Check the heavy wire to the starter. The smaller wire feeds the solenoid, but the fat wire provides the power to actually turn over the engine. Check the ground wire, although that would kill the solenoid also, so it's unlikely.
valves do not normally make a sound unless the seat insert is loose in the head. This will be revealed by a compression test. I suspect that a clanking sound is much lower in the engine --like a big end failure.
Accelleration noises of the magnitude you descibe makes me think the engines crank shaft bearings have gone. Has the oil pressure light come on recently and what's the oil level like. Without being there to hear it, it's very difficult to diagnose. You should detect noises and rattle if you rev it when in neutral if it is the engine. If the engine is smooth in neutral and the oil is good you may have a bad diff or cv joint
Your description sounds serious. The next step is to check the oil level, then check the oil pressure with an external gauge. If the pressure is low, the news is not good and you need to disassemble the engine until you find the issue. The clanking does description does not sound good.
Check your oil level? If not do that 1st and get back to whoever did the maintenance NOW before the engine blows. Because it sure sounds like they did something wrong.
I'm afraid what you're describing sounds like your bearings went out. Your engine is probably seized up or blown. There is no cheap or easy fix for this problem, your engine will have to be rebuilt or replaced.
That doesnt sound good. Check the engine oil level and top up as necessary. If the noise is still there, then you should take it to a mechanic to check. It could mean that you need to either replace the engine or overhaul it. Hope that helps
×