1989 Ford Crown 5.0 L. Victoria problem starter stays engaged after engine starts and ignition is in the run or off position check the alternator 3 wire electrical plug & alternator it will short out to ground and cause the starter solenoid switch to stay engaged thus the starter will stay engaged. I have just finished troubleshooting and repaired this problem. Hope this info helps someone.
Ignition switch is bad or,starter wire is grounding out easy to see in the dark hope this helps
Solenoid may be sticking. Have someone start the car, if it sticks tap the solenoid with screw driver handle. If that stops the starter, replace the solenoid. If it were me, I wouldn't bother testing it and just replace solenoid.
733 views
Usually answered in minutes!
×