Here you go curtorsey About.com.
For the 1991 Honda Accord 2.2L SOHC In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders:
..........(back).........
|...4....3....2....1...|
.........(front)
Distributor:
....(back)
......4
3..........2 \\\\\
......1.....\\\\\
.........\\\\\
....(front)
Let me know if this helped....
SOURCE: i need 1996 honda accord speed sensor plug wiring diagram
Diagram is courtesy of honda
[IMG]http://i34.tinypic.com/10wjogi.jpg[/IMG]
SOURCE: 1991 honda accord "no spark"
There is a relay mounted way up under the dash on the driver side. It
is about 1"x1"x2" and it says Mitsuba on it. This is the PGMFI relay,
sometimes called the main relay or fuel injection relay. It is very likely the problem. You can buy another one, or there was a bulletin on how to repair it. You need to take it out, pop the cover off, and resolder the cracked solder joints on the pc board that the relays are mounted on. Really not that hard if you have a little soldering experience. If not, just buy another one, about 50 bucks.
2,957 views
Usually answered in minutes!
×