I need a pin code for my radio of Hundai Getz please

Get the engine error code off the ECU. If the ECU throws an error code that corresponds to an injector fault, you can test each injector with a pocket multimeter. Here's a pretty good youtube video tutorial on how to run this test -
How to Check Fuel Injector Resistance with Multimeter

Cylinder head torque for getz1.3

this will be from a faulty master cylinder wit a blocked compensation port
pads are dragging and building up heat which is expanding the brake fluid and as it cannot get back to the reservoir it puts the pads on harder
it is also evident if you apply the brakes and the car takes extra power top move off
I suggest that you take it to an accredited brake specialist and get a proper diagnosis and a quote for a new master cyl

Best place would be from hyundai!

A Dealer Reset Is At Hand ! To Clear Errer Code

I need torque settings on hundai getz 1.4 Mains and big ends

It uses Hyundai approved ATF

Sounds like the bearing that pushes the clutch arms to release clutch or the clutch itself is B/O