SOURCE: How to locate the oxygen sensor in a LEXUS LS430 (Bank1 Sensor1)
the O2 sensor for bank one sensor one is located between the catalytic converter and the engine in the exhaust head pipe. see photo of your engine cylinder layout, the sensor u want to replace is the one at the cylinder #1 bank on right.
SOURCE: Check engine light is on
no such thing as a catalytic computer... there is a catalytic converter ... part of the exhaust system so they may now be "guessing" that it's an O2 sensor. take the car to autozone... they will scan the codes for free.... post the codes here tho the lads and lasses there are pretty clever and will probably tell you what the codes mean.
SOURCE: High RPMs
yes its related to knock sensor because car is running rich in fuel, and car runs of on safe mode, so overdrive will be off. have you and a friend replace it. remove intake assembly, then intake manifold, but first remove your anifreeze from radiator, trust me you want to remove antifreeze! their are brackets by the fire wall to hold down the manifold, thats the hard part is taking it off and putting that on since not to much space to work on it. on the block you'll see the two knock sensors, has 2 wires each, knock sensors cost between 150- 200 a piece, still cheaper than dealership putting it on. also buy some liquid gasket because you will need that. after putting it all back together reset the ecu and you should be fine,
SOURCE: 1993 Lexus LS400 acceleration stalls or surges
I HAD THE SAME PROBLEM WITH MY CAR. 93 LS 400. THAT WOULD BE YOUR FUEL FILTER OR THE FUEL PUMP GOING BAD. TRY CHANGING THE FILTER FIRST. THE DEALER TRIED TO CHARGE ME $980 TO CHANGE FUEL PUMP.
SOURCE: check engine light on, replaced oxygen sensor before catalyst,
372 views
Usually answered in minutes!
×