At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Check to make sure that the bulbs are good first, then check your head light/ or head light fuses which may be located in a relay center under the hood.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Well, the problem is that I dont know the reason, you should investigate. There could be issues with lamps (must get new) or electricity problems (must head to auto-service)
Its all attached by clips and screws.Nothing much special.But its all about the procedure.Dont forget the mark the position , location of the screws you remove, so while refitting you don't face any problemTo replace fog light bulb or to replace replace complete fog light unit, click this link below:---
http://technoanswers.blogspot.com/2011/07/how-to-replace-left-front-fog-light.html
----------
This will help.Thanks.Helpmech.
If your PU didn't come with factory installed fog lights then you will need to replace your headlight switch with a fog light enabled headlight switch.
Here is a link to the factory dealer-installed instructions.....
You only need to get the components you don't already have. The headlight switch that is fog enabled will pull out for fog light operation, if yous doesn't you need to replace the switch and do some wiring as shown in the pdf file linked above.
More specifically, with the light switch in the "on" position (not the "auto" position), pull the light switch out. First click is the front fogs, the second click is both the front and rear fogs.
×