If yours Audi A6 has a TDI engine then you must check up (and replace if necessary) each glow plug & glow plugs relay if no burned glow plugs founded.
My Audi drove OK then stopped, the codes said that a camshaft position sensor was at fault, I changed this but still get the same readout and the car will not start
SOURCE: audi a6 avant 2001 owners manual
I have me radio code, BUT on the screen it says SAFE.
Is there anyone who can tell me what i have to press on the radio to type in that code?
SOURCE: HELP, MISFIRING: 1999 Audi A6 Quattro Avant Wagon
P1127 Long Term Fuel Trim mult.,Bank1 System too Rich
P1129 Long Term Fuel Trim mult.,Bank2 System too Rich
P1250 Fuel Level Too Low
P1300 Misfire detected Reason: Fuel level too low
P0154 02 Sensor Circuit No Activity Detected (Bank 2 Sensor 1)
P0300 Random/Multiple Cylinder Misfire Detected
P0303 Cylinder 3 Misfire Detected
P0304 Cylinder 4 Misfire Detected
It sounds like there is a lot going on.
Good Luck
Brian
SOURCE: Cabin air filters, Audi A6 Avant 2006
We had to remove the glove box first then on the centre consol there is a small removal plate, remove this and locate the filters. There are two .
729 views
Usually answered in minutes!
×