I assume you are wearing your seatbelt. You will usually find a wire connector under the drivers seat that will disable the alarm if unpluged. it will just be a 2 wire connector.
This just started happening to me as well with my 08 grand prix... Seat Belt ON but light on dash won't quit flashing and alarm goes off every 60 secs or so. Can I get to the wire without moving the seat? Does disconnecting the wire do anything to the airbag (other forums have said that if the wire is cut then the airbag won't deploy)?
×
SOURCE: 1987 Toyota Camry seat belt alarm
make sure that you fasten you seat belts including passengers
SOURCE: seat belt alarm goes off when belt is buckled
try relapsing the switch inside the female of the seat belt
SOURCE: seat belt alarm wont stop beeping
Check for wire disconnected where you plug your seatbelt into. it will probably go under the carpet a bit, but it is there. If it is broken/disconnected, the alarm will continue to sound. There is one in the passenger side too, but should only sound when a passenger is seated unless you have more than one problem here...
SOURCE: in my 2007 Hyundai Accent,
Check the belt latch,(the short belt you click in and push button to release). It has a sensor in it. Tap and shake it as it may have a foreign object in it. Look under the seat for the connector(s), and make sure they are pushed in all the way and that the wires aren't damaged. If that doesn't help, try disconnecting the connector. If the light and alarm are still on afterwards.....you have two choices. First, replace that part of the belt. Or, try running a jumper wire across the two contacts in the connector but I cant tell you that!!
1,305 views
Usually answered in minutes!
×