Passenger window on my 2000 pontiac gran am gt coupe won"t work

blower control module ( blower resistor) goes bad on all gm models it is located inside the car on passenger side of hvac case.

the passenger switch need to be replaced

bad wiring =)

The cable in the window mechanism (regulator) has broken and wrapped up around the gear on the motor. You will need to replace the regulator/motor assembly.

I had a problem similar to this but mine was in a GT and they would just work when they wanted to. I just had all the wires cut leading to the front passenger seat, back driver seat, and back passenger seat. And left the wires on the main. They all work perfect now. But the downside is that the driver is the only one who can put the windows down. (Which isn't always a bad thing) Hope I could help!

Hello station51946: My name is Roger and I will help you. Number one cylinder will be the front plug. The plug closest to the fan belt. Should you need further help please just ask. Please rate the answer. This way I know it was helpful. Thank You for using Fix Ya. Roger

all orifice tude are between the a/c dryer it will have a indent in the line

If it makes a noise when you try to use it, it might be off track. If it dosen't it's probably a fuse or the moter is gone.

Fuel Filter

Sounds like you might need to replace the regulator. I have a GT and have had the same problem with both front windows, but they would just FALL down when I rolled them down. As soon as the regulator was replaced (it's a $70 part at an auto parts store) everything was fine, then the other one fell down. You can't just buy the regulator, u have to buy the regulator and the motor; even if just a part of it is broken. Hope this helps