Firing order - I need the correct firing order

What year is the vehicle? Mitsubishi used two different systems on that engine. Before 2006 they used a Fuel Injection Pump and after 2006 they used a Common Rail system.
An injection pump is a mechanical setup that is driven by the timing belt to make sure it matches the engine speed when driving.
A common rail system uses an electronic signal to fire each injector at the correct moment from a shared fuel supply rail on the engine.
In general the injector firing order needs to match the mechanical firing order of the engine so the fuel is injected into the correct cylinder at the correct moment. The Firing order is 1, 3, 4, 2. Number 1 is nearest the engine belts and pulleys.

Never seen firing order of123456.
You should be able to find firing order with web search.

By mixing the plugwires up all you did was mess up the firing order. If you have the correct firing order, just plug the appropriate wire to the appropriate spark plug. You do not need to unhook the Battery. Unhooking the battery resets your computer and you do not need to do that for this problem.

Hello shawnob: My name is Roger and I will help you. The correct fire order is 1-8-4-3-6-5-7-2. I also attached a picture to help with locating the correct cylinder and fire order. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

The correct firing order is 18436572. If you need the correct cylinder locations they are as follows:
Drivers side from the front 1 3 5 7
Passenger side from the front 2 4 6 8

1994 Chevrolet C 1500 5.0 liter V-8 VIN "H"




Hope this help (remember comment and rated this).

For the 3.1L
Firing Order:
1-2-3-4-5-6
Cylinders:
(Back of Vehicle)
1------3------5
2------4------6
(Front of Vehicle)
Distributor:
....+....2
1...........3
.6..........4
.....5....+-screw
(front of vehicle)

For the 3.8L:
Firing Order:
1-6-5-4-3-2
Cylinders:
(Back of Vehicle)
2-------4-------6
1-------3-------5
(Front of Vehicle)
Ignition Connections:
o <-----6

o <-----3
o <-----2

o <-----5
o <-----4

o <-----1
(front of vehicle)

Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!

Possibly a bad plug wire in the new set ..it happens.

Or you may have got two or more wires in the wrong firing order

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Hello oluwolesegun: I am Roger and i can help. Firing order on this engine is 1-2-3-4-5-6. Please see the attached picture as tho the plug wire to coils location. Thank You for using FixYa. Please rate the information you received.This way we know you received the correct information. Should you need more help please just ask. Roger

1-4
5-6
2-3
double check first

Because you didn't say which engine this link will take you to a proper site that has what you need