At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If I am not mistaken, these have 2 separate flashers. One for the turn signals and one for the hazards. If memory serves correctly, the turn signal flasher is square and the emergency flasher is round.
One flasher only. Check fuses first. Then suspect the flasher as a possibility. I have seen the hazard switch cause the turn signals to malfunction. Try pressing the hazard button in. If they work and flash as hazards you know the bulbs and flasher are ok. If the turn signals then work you have a defective multifunction switch (the hazard/turn signal/etc switch)
Try replacing the signal & hazard flashers. Some vehicles only use 1 flasher for both. The flashers are usually located under the dash by the steering column. They look the picture below ..
on most newer cars the fuse block is under rhe hood on one of the fenders. google autorepair for a DIY website autzone has a realy good one that has great info on the electricalsystem. but it is not the fuse it's a little thin called a flasher relay that seems to be your problem. the flasher relay on a saturn is available at most autoparts stores and some might help you locate it and put it in for free.
I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING
the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem
THE TURN SIGNAL AND FLASHER ARE TIED IN TOGETHER.YOUR FLASHER SWITCH IS ON THE DASH.ITS A ROUND RED BUTTON WITH A WHITE TRIANGLE ON IT.WHEN YOU PRESS THE RED FLASHER BUTTON ON DASH.IT WILL MAKE YOUR FRONT AND BACK SIGNAL LIGHTS BLINK.WHEN YOU WANT TO TURN OFF FLASHER THEN YOU PRESS THE RED BUTTON.IT WILL TURN OFF FLASHERS.
i have a similar problem but my left signal works, when i turn the right on it just does an annoying buzz sound. if you can think of any explination for such shinanogins help would be greatly appreciated
×