Depending on what engine this is, you should drain oil, change filter, add 3.75 qts of oil, then start engine to check for leaks. Turn engine off, then check the oil fill on the dipstick. Add to proper amount generally at 4 or 4.25 qts.
Let me know if this helps,
Chip
2.0 spi 4.0 qts 2.0 zetec 4.5 qts. 2.3-- 4.54 qts all with filter change
4 Quarts
SOURCE: What kind of oil should i put in my ford focus
Hi,
You do not say what size engine is in the car and this is important as different engines require different oils.
Therefore have a look at this handy oil checker - you can input the exact vehicle details yourself and it will advise on the correct type of oil for that vehicle.
http://www.halfords.com/webapp/wcs/stores/servlet/categorydisplay_storeId_10001_catalogId_10151_categoryId_165581_langId_-1
Please leave a vote for the solution if it helps. Thanks.
SOURCE: Where to put break fluid in the ford focus 2000
you put brake fluid in master cylender on driver side firewall . should not need brake fluid unless you got a leak or pads are worn down .
SOURCE: I have a 2000 Ford Focus. The engine oil light
I would have someone plug a OBD II reader in to pull any codes. This will lead you in the right direction.
2,050 views
Usually answered in minutes!
×