Looking for timing belt diagram on 97 Geo Tracker

of what?
post the problem or symptoms then ask for info on that.
there are like 500 diagrams in my Tracker manual.
see some free ones here.
http://www.fixkick.com/index9.html

i have the books on my self.
why not post symptoms......??????

my wild guess, timing belt change out?
or valve lash or , no matter it's all here.

this is the G16B engine,
this full timing belt page, is here. and has link to actual FSM page.
http://www.fixkick.com/t-belt/16-fast-belt-install.html


related issues here

http://www.fixkick.com/t-belt/tbelt-index.html

3sp to 3sp/
4sp to 4sp? see O.D lamp?
sure those work, but not mixed.
(anything in this world is possible, only different labor time)

on what, spark or cam???
this engine 1 of 2, has cam belt timed
and a distributor timed... know that as a fact;. please.

http://www.fixkick.com/t-belt/16-fast-belt-install.html

that is cam. on 16v only
the pages there cover both engine,, G16a and B.
TBI 8valve and MPI 16v engine.

This is the link to the DIY website for the 1997 Geo Tracker http://www.automotix.net/autorepair/diy/1997-geo-tracker-repair.html

You can get a wiring diagram off this site or got to you local auto supply house such as NAPA and buy a Repair manual for about 25.00.

Hope this helps you out and please rate/vote or place a testimonial on my advice.

Wicked Angel

hanes manual and or under the hood

check the trans mition fluid ut may be low enough to send mixt signals to the the sensors

1996 Geo Truck Tracker 2WD 1.6L MFI SOHC 4cyl



Fig.: Before installing the timing belt, position the camshaft sprocket (1) so that the timing mark on the sprocket (2) is aligned with the notch (3) on the inside timing belt cover (4) ...



Fig.: ...and ensure that the crankshaft sprocket (1) timing mark (2) is aligned with the mark on the oil pump (3)

For more details, can register in autozone.com (free).

I hope help you with this (remember rated this help) Good luck.

remove belts, pull out crankshaft pilley and then pull put seal

I think you might have the older model engine in it.
They had a bigger shaft.