At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
What are you trying to do when the noise occurs?You need to put in a clearer question if you want a clear answer,just saying,the more info that you give will help you get the best answer.What are you trying to do when the noise occurs?You need to put in a clearer question if you want a clear answer,just saying,the more info that you give will help you get the best answer.
You can't post conmments that contain an email address.
Re: Makes a craking sound when closing, but not all the...
Check ur door stopper thats what creates that cracking sound/ door stopper is a linkage attached to ur door panel that limits the swing of ur door...might needs lubrication only...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This could be very dangerous if it is a ball joint about to break. If you don't know how to check for this have a good front end shop check it immediately.
When the "ac flapper" closes and opens where you let off the gas that may be due to a vacuum leak. Vacuum is up when the throttle is not open. Vacuum should control the blend air doors. The ac probably switches to the defrost vents when on the throttle.
This vacuum leak may also be the cause of your running condition. Eliminate the one thing and see if it fixes the other.
check hoses connected to intake manifold for oil. If none have oil, you probably have a worn out valve guide. Do you have high mileage? Only way to fix this is to remove the head and knurl or replace quide. Usually a good time to do a complete valve job. If you have more questions, please let me know.
It sounds like you have a problem with an air leak after the Mass Airflow Meter in the intake system. Check your vacuum lines for any craking or breaks, and make sure that your intake system is intact. Also, make sure that any gaskets that are involved on the intake side are in good shape.
Sounds like it may have blown a head gasket, and or craked/warped a cylinder hear or engine block. If possible, pull all six spark plugs and look for evidence of engine coolant on the electrode.
belts can still sqeak even though they are still on, check the condition of the belt, is it craked?, glazed? spray some silicon spray on it while its running and see if it goes away. the belt driven accesories can also make noise, alternator, steering pump, water pump, idler, tensioner, a/c compressor. use a long screwdriver like a stethescope and see if one belt driven acessory makes more noise than the others, just be careful of moving parts.
What are you trying to do when the noise occurs?You need to put in a clearer question if you want a clear answer,just saying,the more info that you give will help you get the best answer.
×