Where is the ac condensor on a ford escape

SECTION 412-03: Air Conditioning 2003 Escape Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 05/21/2002 Condenser Core Printable View (52 KB) Removal and Installation
NOTE: Installation of a new suction accumulator is not necessary when repairing the air conditioning system except when there is physical evidence of system contamination from a failed A/C compressor or damage to the suction accumulator.
NOTE: If an A/C condenser core leak is suspected, the A/C condenser core must be leak tested before it is removed from the vehicle. For additional information, refer toSection 412-00.

1. Recover the refrigerant. For additional information, refer toSection 412-00.

1. Remove the front bumper cover. For additional information, refer toSection 501-19.

1. where is the ac condensor on a ford escape - ani_caut.gifploads/images/ani_caut.gif" alt="ani_caut.gif" class="h_mi" /> CAUTION: Plug all ports to prevent contamination from dirt or moisture.
   Remove the nuts from the two condenser core air conditioning line (pwhere is the ac condensor on a ford escape - a0021913.gifngs.

1. NOTE: When removing the A/C condenser core, disconnect the two air conditioning line (peanut) fittings from the A/C condenser core.
   Remove the A/C condenser core.

1. To install, reverse the removal procedure.
   • Lubricate the new A/C condenser core with the correct amount of PAG Compressor Oil YN-12-C or equivalent meeting Ford specification WSH-M1C231-B. For additional information, refer toSection 412-00.
   • Lubricate the O-ring seals with PAG Compressor Oil YN-12-C or equivalent meeting Ford specification WSH-M1C231-B.