Chrysler 04 sebring 2.7
The thermostat is located on the left side (standing from the back of the engine) under the Alternator.
First step is to remove the neg bat cable. Try to use a mem-saver as it will save you alot of headache trying to reteach the PCM
Remove the Alternator, be careful not to break the electrical connectors. You should be able to see the thermostat housing (looks like half a ball with 2 hoses coming out of it)
Drain the coolant, and remove the housing..there are 3 bolts. Note the position of the old thermostat before removal. Install the new thermostat in exactly the same position, with the spring-end facing the engine. Clean any debris and residue from the inside of the housing cover.
Put the new gasket on the thermostat and install.
After everything is back as it was, re-fill the radiator start the engine and turn your heater on full. Watch for leaks.
SOURCE: 2001 chrysler sebring leaking water beneath
I want to see a diogram on how i can replace the water pump on the 2001 chrysler sebring
1,127 views
Usually answered in minutes!
×