- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 2:13 www.youtube.com/watch?v=Dwp14p6vBRU Jun 22, 2011 - Uploaded by JesseHafen
2003 Mitsubishi Montero Sport alternator belts pulley auto repair steps. ... My 1999 Montero Sport Limited has 245000 miles and now is giving ...
if you have a vibration only while braking and only in the steering wheel then you have warped front rotors causing the problem. there was a time when you could have the rotors turned and reused. but the way they make rotors now(too thin to start with) you will have to replace them, make sure the wheel nuts are torque to spec.
jack up the car, first break lugs, and remove tire. There are two bolts on the front back side, if it like are endeavor then I compressed the caliper piston and then I had to take apart the caliper as the old pads did not come out, those are the two bolts on each end. then put back on. Once the caliper is off the rotor will come off as it is held on by the caliper. Just be careful with the caliper once it is removed as it is a brake line, you can use a hanger for it does not pull on the line when it is off the rotor. Good Luck Tim
Here's an exploded view, you'll need to pop off the grease cap #6 then remove the snap ring #8 to get the hub off to get the rotor off. Hope it is of some help...pictures always are.
×