Airbag Service Reset Tools
Find the fuse panel cover in the foot well on the driver's side of the vehicle. Pull down on it to open it.
Find a yellow connector inside the fuse panel. Pull out this connector. This is the airbag power connector, also called the SRS power connector.
Insert one end of the paperclip into one terminal of the SRS power connector and insert the other end of the paperclip into the other terminal.
Put the key into the ignition and turn on the vehicle, making sure you don't start the engine. The paperclip shorts out the SRS light, thus resetting and turning it off. Plug the SRS power connector back into the fuse panel. Put the cover back on the fuse panel and shut off the vehicle.
Wait a couple of minutes, then turn the engine on. Look on the instrument panel to ensure that the SRS light has turned off. Turn off the engine and remove the keys from the vehicle.
×