My clutch went out on ac in my 1998 toyota tacoma 6cyl. I was told i need to repace verything. If so what parts do i need?

Had the same issue. This did the trick for me. (If link isnt working search the following in YouTube: Toyota tacoma or Hilux 5 speed $24 fix. poping out of gear or unable to shift into some gears)

https://www.youtube.com/watch?v=7lqaxROF_Yw

You must never have opened the hood &
even looked or ever worked on a vehicle

Appears all the motor options have 4 studs & 4 nuts
holding the fan clutch assy on & 4 bolts holding the
fan blade to the clutch

no miles specify but you need a cluth job.

Give a dealer a call ask for the service department,Ask if the have a repair kit,also call your local parts stores ask them for parts and what special tools are required.Most of them are honest and will be happy to help.("Don't try to unhook any AC lines you could blind yourself if the freon gets into your eyes. if you have to pull the compressor.take it to a repair shop have them drain it for you first"). Hope this helps, Good luck

If you want to change the "Remove clucht trasmision bars front and rear, remove the cylinder in the booth attendant said you have to remove the gear-change broadcasts have jack-remove the bracket that supports the transmission back-to remove the exhaust pipe - Put the jack, remove the screws that attach the transmission with the engine off, remove the transmission clucht well ... You have to ensure the transmission on the jack will not fall

sounds like its time for a new clutch

you can replace for around 100$ or a mech can charge you about five

check that a/c compressor is kicked in. Look at the a/c compressor and if the clutch is engaged it will spin with the pulley.If stationary its not engaged.

I currently have a 1998 Toyota Tacoma, and the clutch pedal does not return all the way. I know it is not the clutch, it is actually the spring located underneath the pedal. It is catching and not releasing after pushed.... Hope it helps.

Replace master cylinder