At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check right side bulbs to verify they are correct bulbs especially the tail light bulbs.....commen on imports...if all Bulbs are good then replace flasher unit under dash....before replacing blinker lever at steering column
pass the Scanner,you will have a o.k diagnostic. Maybe the sensor is faulty indicating faulty, when they are NOT. you can test the sensor too. see the diagram attached. God bless you
left tun signal means you most likely ha a bulb blown on that side.turn key on turn on signal light to each side and check your lights out side for one thats not working.
Hello and welcome to Fixya.com.
Check to see if you have twin tail lamp bulbs on rear i mean when i say this two tail lamp bulbs fitted to each side,check to see if one of the bulbs has blown if so replace it this will correct your computor.
Best regards.
George...
its a warning that the light is stuck on
it could be caused by the earth or grounding is faulty may just need to remove bulb 7 put it bak in it may fix it & the warning should dissapear
Purchase the correct bulb, open your hood, unscrew the white retaining ring behind the non working lamp when loose turn black connection 1/4 turn counter clockwise till tabs line up pull straight back remove old bulb put on rubber gloves or BE CAUTIOUS NOT TO TOUCH NEW BULB GLASS WITH BARE FINGERS. Oils from your hands an cause bulb to heat unevenly and cause new bulb to explode in the headlight assembly So with gloved hands open new bulb insert follow steps in reverse to reassemble. Happy Motoring
Turn indicators blink a lot faster when a bulb is blown or a wire is diconnected. Check front and rear signal lights to make sure they work after you turn on right turn indicator.
×