2004 Saab 9-3 Logo

Related Topics:

Posted on Mar 27, 2010

Left signal wont turn off, and right signal wont

Flashers work. but when the signal lever is in neutral postion the left signal flahes, and when the lever is moved to put on the right signal nothing comes on. the left signal works when the lever is moved to turn on the left signal light.

2 Answers

Paulo Fender

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

  • Contributor 6 Answers
  • Posted on Feb 18, 2016
Paulo Fender
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

Joined: Nov 27, 2013
Answers
6
Questions
0
Helped
1673
Points
38

I Think your turn signal switch is most probably faulty. So that, you will need to replace it. Please, check the video below. It shows the operations to replace the turn signal switch. I think that the operations are quite similar in most modern cars. Good luck!

How to Easily Replace a Turn Signal Switch - Clio 2 and other Renault/Dacia

http://www.youtube.com/watch?v=JKiy-F8pd6o
How to Easily Replace Turn Signal Switch Clio 2 and other Renault Dacia

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Apr 21, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Apr 21, 2010
Answers
1
Questions
0
Helped
703
Points
1

If you find out how to fix this, can you post it. I am having the same problem. I thought I would need a new turn signal switch but I am not sure. TB

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My left turn signal recently stopped working. Before ceasing to work, the turn signal (just the left) would blink very rapidly (machine gun speed).

sounds like one of light bulbs was malfunctioning and caused the flasher unit to blink rapidly and iy burned out. Replace front and rear turn lite bulbs and see if flasher flashes. if not check fuse and replace fuse. If fuse okay replace flasher unit. Good luck
0helpful
1answer

Turn lights blink with hazards but not with turn signal..flasher replaced. is It the multifunction lever then??

There should be a turn signal flasher and a hazard flasher. They are two different parts. If you replaced the hazard flasher and not the turn signal flasher than I would start by replacing the turn signal flasher.

One thing you can do once you find the turn signal flasher is to unplug it and use a jumper wire between the two pins of the connector then turn the key to the run position and place the turn signal lever in the left or right position. If the turn signal lights know light up than the turn signal flasher is the problem

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
1answer
0helpful
1answer

My left turn signals don't work.you can hear the clicker working normal and the courning lite come on. If you leave the signal switch on the turn lite will flash once in a while and also the lite on...

You most likely have a bad bulb, if the front bulb goes the rear wont work and vise versa both bulbs must be good to complete the cirrcut. Even though you have no lights you should still hear the flasher relay. Bulbs are cheap just replace both and you'll be good to go. Good luck
1helpful
1answer

LEFT TURN &4WAYS WORK NO RIGHT TURN SI98 BUICK PARK AVE

The first thing is to replace the flasher, the 4ways and signals use diffrent flashers, after replacing the flasher or changing it with the 4way flasher and see what happens. if this doesnt help then you may have a bad signal switch, a good trick is to turn on the signal and watch it as you move the lever around, pull back a little or lift it more and pull down a little, sometimes the switch contact goes bad and by moving the lever without take signal off will make it flash and if that happens then the signal switch is bad even if the 4ways work this still means a bad switch, the 4ways are wired through diffrent contacts then each signal, good luck.
1helpful
1answer

Signal Lights - flasher...

Hi it sounds like the multifuntion switch
never had one on a monte carlo before but lots of grand am and malibu
hope this helps
0helpful
1answer

Hazard Lights do not work....correctly.

the emergency flasher switch is at fault and most likely needs replacement. i'm not sure what it is with chrysler products but i've had two with problem flasher switches.

Robert

Please take a moment to rate this solution thanks
0helpful
3answers

Turn signals wont work

replace the hazard fuse under the dash any repair shop can heklp you with it
2helpful
1answer

Turn Signal problem

2003 mini cooper . Went for a clean up,and came back with the righ turn signal on all the time. every thing else works fine when you turn left or 4 way flashers. Any help will be appriciated. Thanks in advance
Not finding what you are looking for?

713 views

Ask a Question

Usually answered in minutes!

Top Saab Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...