2006 Dodge Ram 1500 mega cab abs and brake lights stay on

Hi Javier, Im AL the owner of Big As Auto Repair

Javier, ABS Module is located under the hood. It mounts to the side of the hydraulic brake system. Hope this helps and please visit my auto-repair website and check out the satisfied customers and give me a shout while your there. http://www.bigasautorepair.com/

96 should be abs equipped, if only in the rear. Please verify the info is correct...

have the code pulled from the abs module to know where to start to diagnois first.

The abs engine light comes on to let you no that the abs brakes are on.

have you tried releasing your parking brake are they on only on dash /or do you mean that the rear brake light stay on ?

check again the connections and that it is clipped on to supports correctly -also check the wires may have damaged or frayed one of the lines

on 1997 dodge ram 1500s you can look at the back of the front brakes and if you do have 4wheel abs you will have a brake line and an electrical line running tto the brake caliper. you can also look at the master cylinder, on the right side of the power brake booster (if youre looking from the front of the truck) there will be a metal brake distribution block if it has 2 lines running out of it you have 2 wheel abs...4 lines means 4 wheel abs

Replace the speed sensor in the rear end.

The brake and ABS light both come on when you are receiving no speed signal. Most likely the speed sensor in the top of the rearend is bad.

just a thought but, disconnect the battery for 10 to 15 minutes to reset the memory. You might have a computer that is not resetting.

Also, even after resetting you might need to drive it to "force computer to recognize the faults are cleared.