2007 Lexus RX 350 FWD Logo
Posted on Mar 23, 2010

07 lexus rx 350 with check engine light code p0304

07 lexus rx 350 with check engine light : first time pulled code p0356,also has VSC lite on,clear code, swap coil #6 to #5,after 20mile driving lite come back with code p0304 with freeze frame info and p0301 p0302 p0303 p0305 p0306 and p0354, vehicle shaking at time only on freeway around 60 to 75 mph ... Thanks for help...

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Apr 29, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Apr 29, 2010
Answers
1
Questions
0
Helped
3711
Points
9

Hi, did you ever get an answer? I have the same issue. Thanks.

  • G_Luck Nov 23, 2010

    You need to replace your ignition or engine coil for one of your cylinders. It is equivalent to a mini tuneup in the old days.

  • Anonymous Jan 15, 2011

    I had the exact same problem. code was coming up for the coil in cylinder 4, swapped it to cylinder 6, code moved to 6. Replaced the coil and all was fine. (Note: I put the new coil in cylinder 6) Until 8 months later. Engine light came on after minor rumble in vehicle, same as before. Code came up again in clylinder four, swapped 2 and 4, light came back on and code moved to cylinder 2. So something is causing the coils in cylinder 4 to blow. Does this make sense or do you think it is coincidence that both coils went after being in cylinder four.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I fix 2006 RX 350 SE VSC and Check Engine, Track off - light on, any advice please.

the first thing you need to have the vehicle scanner for codes, then code will guide thrugh the repairs need it.
0helpful
1answer

The Vsc on 2003 Lexus RX 300 engages front passenger side tire only,VSC light will eventually come on and stay no issues,clear the light and problem returns !any help?

Why have you not had the vehicle at a shop, so they
can check the systems for codes & at least find a problem?

You clear dash lights,you clear ALL the data needed to work on
any vehicle, until the lights come back,codes return or emission
monitors run
0helpful
1answer

My car is showing a message on the display. it shows ''Check VSC" what is the meaning of this message?

"vehicle skid control". If "check engine" light is on , it will set the "vsc" light. Have all "engine" and "abs" codes pulled.
0helpful
1answer

Engine and vsc

from what i experianced you need to change one of the oxcegen sensor
0helpful
1answer

Is it OK to drive my RX 350 with the check engine light and VSC light on?

Yes you can still drive it, and having the o2 sensor replaced should fix the problem.
1helpful
1answer

Car sat in parking lot for 3 days, with a lot of rain. Upon start up Check Engine & VSC began to flash. Car ran normally for 2 miles. Pulled over shut down car, waited 10 seconds re-started engine...

It likely had water on the ignition system. The check engine light will flash for misfire. The VSC light is on just because the check engine light is on. You likely have it dried out now and its fine. You just need to clear the codes. Autozone will do this for free.
0helpful
1answer

2007 Lexus,RX 350, 101,200 mileage - Malfunction Indicator Lamp and VSC lights came on after driving 30/40 miles. Vehicles driving performance seems normal. Checked Gas Cap. The only Dealership close by...

If you have MIL get the codes scanned, at least they will help point you at the real cause of the problem. For the moment ignore the VSC warning until the MIL has been successfully diagnosed and cured. Nine times out of ten curing the MIL will resolve the VSC warning.
0helpful
1answer

Vsc light on my lexus rx 350 2007 .

I'm not sure about the Lexus, but Nissan and other vehicles with the VSC usually will be on until you can drive on a straight road for approximately 2-3 miles without stops and about the same speed during the reset process. The interstate or some type of hwy will reset this light once the vehicle has learned the Vehicle Stabilization Control in which is learned by the way you drive and enables the car to have stable control. Hope this helps out, if this doesn't work, I would take it in for more diagnostics.
Not finding what you are looking for?

3,721 views

Ask a Question

Usually answered in minutes!

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...