Click on the following direct Link. It has the Serpentine Belt Diagrams that you will need for your specific engine and options.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2000/make/pontiac/model/grand_am/2000_pontiac_grand_am_drive_belt_routing_diagram.htm
Diagram under the hood , sticker will be placed on the hood underneath
SOURCE: serpentine belt diagram:
The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.
SOURCE: serpentine belt
When you open the hood there is a diagram on a sticker that shows exactly how to do this. Should be on the front lip or the side of the engine compartment. You have to make sure you get it lined back up right and remember to check it once the engine has been started and make sure it running on all the pulleys correctly.
Here is a good diagram that should be able to help in case your sticker was damaged or removed. Good luck!
http://www.2carpros.com/car_repair_information/tec_info/1999/pontiac/grand_am/1999_pontiac_grand%20am_drive_belt_routing_diagram.htm
SOURCE: 2001 pontiac sunfire serpentine belt diagram
go to autozone.com and it will give you the belt diagram
SOURCE: serpentine belt diagram?
Should be a diagram sticker in the engine compartment, either under the hood or around the top of the radiator.
696 views
Usually answered in minutes!
×