At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here is a general vacuum hose and line placement diagram for a 2001 Dodge Ram 1500 4x4:
1. The vacuum line from the engine intake manifold should be connected to the vacuum reservoir tank. 2. The vacuum line from the vacuum reservoir tank should be connected to the vacuum actuator on the front axle. 3. The vacuum line from the vacuum actuator on the front axle should be connected to the transfer case. 4. The vacuum line from the transfer case should be connected to the vacuum actuator on the rear axle. 5. The vacuum line from the vacuum actuator on the rear axle should be connected to the vacuum reservoir tank.
It is important to note that the specific placement and routing of vacuum hoses and lines can vary depending on the make and model of your Dodge Ram 1500, as well as any modifications that may have been made to the vehicle. It is always recommended to refer to the manufacturer's instructions or a repair manual specific to your vehicle for accurate information. Additionally, it may be helpful to take pictures or label the hoses and lines before removing them to ensure proper reinstallation.
I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manuals
14 mins ago - 1 Answer. Where do the vaccum lines go into the transfer case on a 2002 RAM 3500? I need a diagram of the vaccum lines into the transfer ...
There is a vacuum switch on top of the transfer case that gets stuck check that. It redirects vacuum to the vacuum actuator on the front axle when the transfer case is shifted into 4x4.
try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
you sure its not the breather tube for the t-case. about 3/8 hose if it is. the vacuum lines for the 4x4 are small plastic lines. red, blue, yellow, etc. think there are four of them
×