I have a 1999 S320 benz I have done all tune up on it. Spark plugs, fuel filter, even fuel ijector pro cleaning. the problem is that some times when I turn off the car like to go in the supermarket or something for like 10 or 20 minutes and get back and start it tries to start and take a while to start and after that no problem sometimes all day no problem and sometimes everytime i turn it off and start again it happens. also my radio system is in german and need to make it english I keep getting told I need a cd to do so ??? where do I get it

SOURCE: Changing display language

hi you need to take it to the dealer to have it scanned. There is a way to fix it with the buttons on the dash. But you need to know German if not the dealer can fix it and it wont cost much to get it fix. hope this helps

workitover

SOURCE: 1997 mercedes benz E320 acceleration problem

You may also have issues with your air flow meter.Generaly though this symptom is usualy a fuel pressure problem.This test may or may not work depending on wether the fuel rail is the problem or the pump.Squeeze the fuel return line at the back of the fuel rail and if engine improves the fuel pressure regulator on the fuel rail may be faulty.If no improvement its likely the pump.The best and most accurate test would be to use an inline fuel pressure tester.Can you hear the pump pumping up to pressure when you turn the ignition on?Usualy though the pumps fail but can be heard running but unable to maintain pressure.

SOURCE: fuel gauge lights keep flashing mercedes benz s320 car has gas

psi diff inside tank is wrong.
use a OEM fuel cap to make light go off.
make sure it clicks at least 3 times.

Testimonial: "i did change my gas cap yesterdayi bought it from mercedes but is my tire pressure off?"

mx5turbo92

• 545 Answers
• Posted on Dec 17, 2009

SOURCE: i need the mercedes benz 1999 clk 430 radio code

AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
2. The code number for the radio is advised to you on the enclosed CODE CARD.
3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.

1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
2. The code number for the radio is given on the enclosed CODE CARD.
3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.

SOURCE: 1995 mercedes benz s320 radio codes

radio ask for code