SOURCE: left low beam light doesn't light
Go to autozone and ask them to put it in for you..lol or o'reillys. Youd be surprised at how much they will help you if you ask, It would be hard for me to tell you how, but under your hood on each side of your radiator, you can probably see back of headlight. If not it may have to be removed, just look how it is held in place, If I didn't help you I will if you will provide me more info, I do this for free to help people, please give a me a good rating, I don't have anything to gain by trying to help but for a better rating
SOURCE: how do you change the low beam on an e320 Mercedes
Sit down outside your front wheel by the side marker light with a stright screwdrive and gently pry it off back toward yourself. this assembly will flop out to you. won't get to it any other way....low beam ? I have not replaced one yet. got you halfway there. don21093
SOURCE: My low beam light bulb
well this is not easy unless you make a accessby removing anything in the way,or just take the headlight out ,How did you manage to open the bonnet as these vehicles from around this year started using a sealed bonnet that only the dealers can open with a special electronic key that uses rolling encrypted software.
SOURCE: How to replace my low
If your car with xenon head light you don't try to replace bulb, it's need experience hand to do it, if it's jest normal light you can replace it, first open engine hood then have a look back side of the head light you can see back cover, on the cover you can see direction have mentioned open and lock turn the cove to open direction, after that you can see the electrical socket for bulb jest pull it out then have a good look the bulb have lock by the tensioned string lock, if you have good look you can see how it's can remove, it have hookup on bottom you have to press the lock for release from locking point after release from lock you have to fold it up and take bulb out, the bulb also have center lip to fix it right position you must have good look before remove the bulb and keep it in mind, center lip must be set upward, and install revers order, is this information helped you?
SOURCE: how do i replace the low beam headlamp on a 2008
Under the hood, there are two round head lamp covers on each side. One for high beam and one for low beams. The low beam is the outer cover. Turn this cover counter clockwise and remove. This will expose the back of the bulb. There is a small clip holding the bulb into the headlight housing, but you must unplug the light before removing clip. Once you have unplugged the light, the small metal clip can now be undone. on the side opposite the hinge, push the clip in towards the casing and then to one side (which way to push depends on which light it is.) Then the clip will release. you can now remove the bulb. place new bulb in and make sure it securely fits into position. reinstall the clip and reconnect the power. check for propeer function of the lamp before replaceing the cover. Once you confirm lamp is working replace cover and you are done.
This is easiest to see on the passanger side light. The driver side is slightly more cramped.
190 views
Usually answered in minutes!
×