-
Lincoln Master
17,989 Answers
- Posted on Mar 17, 2010
Re: I need to reconnect my radiator in my 2000 ls v8
For 2000 Lincoln LS 3.9L SFI DOHC
8cyl...
Radiator - Removal & Installation
-
Drain the engine cooling system.
-
Remove the upper radiator sight shield.
-
Remove the air cleaner outlet tube.
-
Remove the six bolts and the two radiator upper support brackets.
-
Remove the upper radiator hose.
-
Remove the bolt and position the receiver drier aside.
-
Disconnect the dual flow coolant valve electrical connector and
the A/C line from the fan shroud.
-
3.0L engines only:
Disconnect the Throttle Position (TP) sensor and the Idle Air
Control (IAC) valve electrical connectors.
-
Remove the bolts.
-
Remove the bracket.
-
3.9L engines only:
Remove the bolt and position the electric water pump aside.
-
Disconnect the high pressure cooling fan bracket and line.
-
Inspect the seal and install a new seal if necessary.
-
Disconnect the return hose from the cooling fan and shroud.
-
Separate the return hose from the fan shroud and position aside.
-
Remove the two bolts and the fan shroud assembly.
-
Remove the A/C condenser.
-
Remove the two bolts and position the multi-cooler assembly aside.
-
Remove the bolts and the condenser support brackets.
-
Remove the radiator.
To install:
-
Install the following:
Radiator
Condenser support brackets
Multi-cooler assembly
A/C condenser
Fan shroud assembly
-
Connect the return hose to the fan shroud
-
Connect the high pressure cooling fan bracket and line.
-
3.9L engines only:
Replace the bolt and position the electric water pump aside.
-
3.0L engines only:
Connect the Throttle Position (TP) sensor and the Idle Air Control
(IAC) valve electrical connectors.
-
Replace the following
The upper radiator sight shield.
The air cleaner outlet tube.
The six bolts and the two radiator upper support brackets.
The upper radiator hose.
The bolt and position the receiver drier aside.
Hope help with this (remember rated and comment this).
×