How to erase toyota camry code obd 1

Hello, and welcome to FIxYa.

To erase the check engine light on a 1994 Camry, open the hood, and, in the engine compartment fuse box, remove the blue 15 amp EFI fuse for one minute. This will clear the codes. If you have a hard code; ie a malfunctioning sensor, the light will come right back on.

Thanks for choosing FixYa for assistance.

I would do what Toyota Ed said.. it doesnt cost anything
and if the code comes back, you can take it to your local autozone
or similar parts store and have them scan it for free..any reputable
parts store will check it and reset it for free.

bill

Go with Toyota Ed.

I took my 1994 Camry to "Autozone" for a check engine light and they told me it was too old for their code check unit. Apparently that year uses OBD1.
Speedy

Here's what you can do.

Buy a $57 dollar code reader it coems with a code book. This will erase the code the correct way instead of pulling fuses. You could pull the wroung fuse there so be carefull. There is always safty warning when pulling fuses. I would get a code reader that way you know the problem and can fix it cheaper then going to a mechanic in most cases.

Thanks

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620