Question about 2008 Chevrolet Malibu
2008 chevy malibu. cannot unlock doors from driver side or passanger side of car. i can lock doors however from driver side only not passanger but can lock doors when car in park, not while car in motion. keyless remote works fine. car locks putting car into gear and unlocks when car in park. car will however just lock and unlock when car is in motion at random times. what can cause this problem? any help would be
given advice of checking interminnent door adjar lock contacts. only problem is where would i find that located in vehcile. any help please
My girlfriend has a 2008 Malibu. The door locks began to falter one by one until three of the locks had to be operated manually or by using a key. I checked the fuses, the BCM and the lubrication on the locks. The door lock actuators were the real problem. She was quoted about $1000 to fix the problem and replace all three of the bad actuator/ door lock assemblies through the dealer. I called and got a price of $125 for the front door and $105 for each of the back doors from the dealer. I was able to fix all three door locks in about three hours myself. It took a few star end bits, a 10 mm socket and a regular phillips screwdriver to get the job done. It has been two weeks now and she is ecstatic that the problem has been fixed and she saved about $750. This seems to be a common problem with this car, when ordering make sure you have the VIN number of the car you are working on to ensure you get the right part. Depending on the year of the vehicle there was a production date split for these parts.
Posted on Sep 19, 2011
You have a intermittent condition. To isolate the cause: 1.Disconnect the drivers door lock/unlock switch from the connector. Drive the vehicle and see if your random lock/unlock condition has stopped. If it has, replace the switch. If it hasn't:
2. You have a grounding problem or a problem in the BCM (Body Control Module) and should have a technician use a Tech 2 Diagnostic Link Tool to access the BCM computer to obtain any fault code data to help correct the condition.
Posted on Mar 07, 2010
Your issue is in the BCM and not the actuators, Its worth a diagnostic fee to have the fault codes pulled from unit and go straight to the issue.
Posted on Jan 08, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 29, 2015 | 2011 Chevrolet Malibu
Aug 28, 2012 | 2008 Chevrolet Malibu LT
Jan 12, 2011 | 2005 Chevrolet Cobalt
Apr 06, 2010 | 2008 Chevrolet Avalanche
Mar 09, 2010 | 2008 Chevrolet Malibu
Mar 05, 2010 | 2008 Chevrolet Malibu
Aug 12, 2009 | 1996 Chevrolet Blazer
16,497 people viewed this question
Usually answered in minutes!