At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Take a good look at the connectors, there is a tab in the middle of the connector that must be push down and held while you wiggle and pull connector out. sometimes it is hard to see or get to but it is there,
http://www.classic-spares.net/CD%20Info/Nissan_Primera_P12_Workshop_Manual.htm
http://www.heroturko.org/n/nissan-primera-service-manual-p11/
http://www.manual-car.org.ua/en/showthread.php?t=1647&page=1
I'm not sure which model or year you have but one of these sites should be able to help you.
Good Luck!
My NIssan Primera P11 is sluggish after starting it - it takes a long time before it gets off. This happens when I have parked it for few hours before I start it.
hi i am not 100% sure but i think it is the P11 144 gearbox its used with the almera qg15de engine. i think it is also used in a primera and almera tino of the same years.
you will have to loosen the center nut that is located on the front hub while the care is still down on the ground to make it easy to undo then jack the car up and put it on a car stand then loosen the 6 locating nuts and bolts on the gearbox flange if it dosent have the bolts and flange it requires to use 2 leavers on both sides of the iner c v joint and pop the c v out before you try to pop the c v out you must undo the bottom lower control arm so that you can move it free if you dont undo control arm it will keep the c v sold against the fron wheel hub
×