Service stabilitrak & service traction control

Service Stabilitrak, Traction Control lights ON, alone with check ...

chevroletforum.com > ... > Equinox

Jul 9, 2012 - Service Stabilitrak, Traction Control lights ON, alone with check engine light. ... 2007 Chevy Equinox LT FWD 2007 Saturn Ion 2 Quad Coupe ... HELP - Service Stabilitrak & Service Traction Control
Aug 30, 2011
Service Traction Control - Stabilitrak and ABS light, Help ...
Feb 12, 2011
Stabilitrak Off Message + lost Power stearing
May 31, 2009
More results from chevroletforum.com

Chevy Equinox Eco, Traction Control and Stabilitrak Systems

? 2:39
https://www.youtube.com/watch?v=15Qj4HzpBz0

Service Traction Control - Stabilitrak and ABS light, Help - Page ...

chevroletforum.com > ... > Tahoe & Suburban

Aug 16, 2012 - Service Traction Control - Service Stabilitrak and ABS light came on. ... Its supposed to still be under warranty, "Major Guard". ... I replaced my rear shocks with OEM re-manufactured Arnott shocks (great company) and in the ...

SilveradoSierra.com • Traction Control, Stabilitrak & ABS Issue

www.silveradosierra.com/.../traction-control-stabilitrak-abs-issue-t18976...

Jan 28, 2014 - Traction Control, Stabilitrak & ABS Issue. Tue Jan 28 ... The wife and I got in to head out and see my brother and as soon as I turned the key the ServiceTraction Control, Service Stabilitrak messages flashed and the ABS light came on. ... check your wheel bearings my was gone and caused the same thing ...

Chevrolet Impala Questions - Hello. I have a 2012 Chevy ...

www.cargurus.com > Questions > Chevrolet > Impala

CarGurusApr 6, 2013 - Occasionally when I hit the brakes I get a Stabilitrak Error Message " ... I believe GM still had 3 year/ 36,000 mile bumper to bumper ... After about 2 months of intermittent noises the ABS light came on, the service stabilitrak warning, servicetraction ... Edit....left hub bearing change after the right one changed.

Replaced front hub - now ABS/Stabilitrak lights on... - Chevy ...

Service Stabilitrak, Traction Control lights ON, alone with check ...

chevroletforum.com > ... > Equinox

Jul 9, 2012 - I have a 08 Equinox with 79000 miles on it, for the last few weeks or soI've been having the service traction control/ service stabilitrak light ... HELP - Service Stabilitrak & Service Traction Control - Chevrolet ...
Aug 30, 2011
Service Traction Control - Stabilitrak and ABS light, Help ...
Feb 12, 2011
More results from chevroletforum.com

How To COMPLETELY Disable Traction/Stabilitrack Control ...

? 6:16
https://www.youtube.com/watch?v=TUoV2ue7amY
Jul 7, 2013 - Uploaded by Kyle Riegle
How to completely disable traction control on gm/chevy trucks and suv's. ... I got to anaheim the light of the ...

Has anyone ever had the service stabilitrak, service traction ...

check for codes in the ABS module to start as it controls traction control and I think works with Stabilitrak.

StabiliTrak Indicator Light: If the warning light does not come on then, have it fixed so it will be ready to warn you if there is a problem. If it stays on, or comes on when you are driving, there may be a problem with your StabiliTrak system and your vehicle may need service. When this warning light is on, the system is off and will not limit wheel spin. Adjust your driving accordingly.

This light will also flash when the StabiliTrak system is active. If the StabiliTrak system warning light comes on and stays on for an extended period of time when the system is turned on, your vehicle needs service.

The traction control part of StabiliTrak can be turned off by pressing and releasing the StabiliTrak button if both systems (traction control and StabiliTrak) were previously on. To disable both traction control and StabiliTrak, press and hold the button for five seconds.

Traction control and StabiliTrak can be turned on by pressing and releasing the StabiliTrak button if not automatically shut off for any other reason.

When the TCS or StabiliTrak system is turned off, the StabiliTrak light and the appropriate TCS off or StabiliTrak off message will be displayed on the DIC to warn the driver. Your vehicle will still have brake-traction control when traction control is off, but will not be able to use the engine speed management system.

If the StabiliTrak and/or Traction Control are not operating properly, I encourage you to take your vehicle in for inspection. A certified technician will be able to offer a more accurate diagnosis.

You will need to have those systems scanned to retrieve the trouble codes. You can then use those codes to help figure out what is going on. A high end scan tool will need to be used to get the codes. Any good shop or dealer will have one.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

You must have the system scanned with a special tool by the dealer before any repair can start.

Hi there:

Your vehicle is equipped with StabiliTrak, which combines antilock brake, traction and stability control systems and helps the driver maintain directional control of the vehicle in most driving conditions.
Traction control activates when the controller senses wheel spin. StabiliTrak will selectively apply the brakes and reduce engine torque to help regain traction.


Stability control activates when the controller senses a discrepancy between your intended path and the direction the vehicle is travelling. StabiliTrak selectively applies braking pressure at any one of the vehicle's brakes to help guide the vehicle in the direction which you are steering.


When you first start your vehicle and begin to drive away, the system performs several diagnostic checks to insure there are no problems. You may hear or feel the system working. This is normal and does not mean there is a problem with your vehicle. If driving conditions delay system initialization, the STABILITRAK NOT READY message may be displayed. If this is the case, your vehicle does not need servicing.


When the StabiliTrak system is both on and actively controlling the stability of the vehicle, the StabiliTrak light will blink for the duration of the event.


You may also feel or hear the system working. This is normal.
StabiliTrak will turn off automatically if a problem is detected in the system. The StabiliTrak light will come on and SERVICE STABILITRAK will be displayed on the DIC. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the SERVICE STABILITRAK message (or StabiliTrak service light) does not clear itself after restarting the vehicle, you should see your dealer for service.


Hope this helps.

{: ) Your stabilitrak system may not work properly. The vehicle need to be scanned for trouble codes. In case you get a C0196 code, the recommendation is to reprogram the electronic brake control module. I hope that's the only cause.

I AM HAVING THE SAME PROBLEM BUT MINE ONLY COMES ON WHEN I AM IN GEAR, IDLEING AT A STOPLIGHT OR IN A DRIVE THRU. TOOK IT TO GM AND THEY ARE TELLING ME IT IS A "P0300 AND P0301" CODES WHICH SAYS IT A VALVE TRAIN MIS-FIRE ( TO FIX IT IS A 2000.00 HEAD JOB) AND THAT IS WHY THE STABILITRAK AND ENGINE LIGHT COMES ON!!! IN MY RESEARCH SO FAR I HAVE FOUND NOTHING THAT TIES THE TWO TOGETHER.
I HAVE 102,000 MILES ON MINE AND IT RUNS PERFECT AND MPG IS THE SAME AS THE DAY I GOT IT. I WILL KEEP YOU UP ON WHAT FURTHER I FIND. I AM NOW IN CONTACT WITH THE GM DISTRICT SUPERVISOR.