At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
not enough information but if they're squeaking when your blood pressure replace the pads or shoes if they feel hard as a rock bad brake booster if there's spongy bad master cylinder vaya automotive repair book
remove your tires. brake shoes and pads. and then you should be able to pull off your rotor. it may need a little help but a rubber mallet will help there.
Inspect the master cylinder. The pedal may not be connected correctly or there are bad seals that is causing you to loose pressure resulting in no resistance. In some cases you may see leaks.
Pull the wheel,you will find that the brake pad,or after pulling the drum,the shoes are in bad shpe,if not ,check the wheel bearing,but my bet is the shoes,or pads are bad,do A brake job,it will most likely be the problem.
Start by jacking the car up, place on jack stands for safwety, You will see the brake calaper which holds in the shoes, you will see two bolts which holds the brakes together, remove these bolts, then remove the pads. Remopve the bolt and pen holding the rotor on, take the rotor to a brake shop, see if it can be turned instead of having to purchase a new one. When replacing the brake pads you will have to use one of the pads to push the pressure plate back into the calaper to replace the pads. You may want to remove some of the brake fluid so it wont over flow when doing this.
×