At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi this is the service indicator, it means you have either, 28100miles before next service, or if the wrench is showing, you have gone over your next service by 28100miles...hope this helps
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here's the trick: use a long screwdriver between the shaft and a bolt or between 2 of the bolts to hold the fan while you loosen another bolt with a wrench. Don't remove any bolts until they are all loose. Keep using your screwdriver on other bolts to hold the fan until you have them all loose. Does this make sense?
Hello my MB ML320 wont start, only start if I jump it,i change battery but I have same problem it start if I drive for long time but if is park for more than 5 hours it wont start.
pull on the noob right next to the time one way changes hours other way changes min. !!!!!!!!!!!!!!pull hard on noob that you can turn it!!!!!!!!!!!!!!!!!
The spanner or wrench you are seeing indicates how many miles are remaining before your vehicle is supposed to have the oil changed. Normally this is about a 10,000 mile interval and may be reset after an oil change by following this procedure...
Do the following steps:
Move start switch to position "2".
Within the first 4 seconds after moving the start switch to position 2,
press the reset button for the trip counter twice within one second.
The display for the service request is activated for about 10 seconds.
Within these 10 seconds, move the start switch into position "0". The service request continues to be displayed.
Press the reset button for trip counter and keep it pressed.
Move the start switch into position "2".
Continue to hold the reset button for the trip counter pressed
until the signal sounds and the new start distance appears in the
display (it takes about 10 seconds).
wrench 281000, what are u asking here?
×