- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Replacement bulbs aren't very much money - replace one and see if it works. If they haven't been replaced since it was manufactured, it's probably time.
You need to first establish that you have current to the headlight in question. With it being so flaky in how it is working I would bet that your connector is bad at the light. Grab a meter and see if you are getting your 12 volts to the connection. Cleaning it out may help you for a while.
I believe in a Chevrolet you push the left stalk (turn signal stalk) foward for high beam and back for low. If you have the lights on low beam and pull the stalk back, you'll "flash" your high beams.
maybe a fuse the fuse box is under the drivers side passenger seat . sometimes ive seem them get something spilled on them and i had to wiggle the fuses to clear the corrosion
×