Question about 2000 Chrysler Grand Voyager

2 Answers

My voyager wont start it seems the alarm has stuck on , when i turn key nothing new battery fitted ,led light for alarm does not flash anymore /gear/milage lights do not come on ,i have taken battery off /put it back on still nothing , lights on top part of dash work ie alarm/brake /etc but wont turn over

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,740 Answers

This may sound a bit simple but check the starter solenoid function by running an external wire to the thin wire terminal from the positive post on the battery.

If the starter does nothing then the starter is bad.

What your describing is a typical solenoid / starter problem. Given the car is now 10 year old, it is quite possible that either the solenoid or starter has failed.

Thanks for using FixYa!

Kelly

Posted on Feb 15, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

But in my car it start with jump and again if i dont start for 24 hrs. battery gets dead. every time if i dont use my car for 24 hrs i need to jump start my car

Posted on May 06, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My 2004 Ford F1 50 super crew cab truck or not crank and the landline only - flash is really really fast


When you turn the key does nothing happen at all?
Can you hear relays clicking?
Have you got headlights power?
Does the lights on dash come on?
Is the flashing really fast the alarm/immobiliser LED and is there a sequence to the flashing like 5 flashes then a pause?

Jan 02, 2015 | 2000 Ford Focus

1 Answer

New battery In mercedes no power


I'm not a car mechanic, but, it sounds like you might want to check the fuse to the ignition switch, and, if that fails, it might be a problem with the Start Safety Switch on the transmission. Good luck.

May 02, 2017 | Mercedes-Benz S-Class Cars & Trucks

1 Answer

93 infinity j30 wont start


CHeck for loose/bad connection at battery and starter.

Jul 19, 2012 | Cars & Trucks

2 Answers

Hello i went in to a store and when i came out my 2000 hyundai sononta wont start my dash, headlights and that little red led alarm ligh are flashing but nothing happens when i turn the key. I tried...


I take it the key fob doesn't work Try disconnecting the battery for 30 minutes and see if that will reset the alarm. You may need the key fob to reset.

Jun 18, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

Flashing alarm light after battery change. Car wont start,


System operation
System arms 5 seconds after switching ignition OFF. Switch ignition ON. Ensure clock LED illuminates for 3-5 seconds. If LED flashes rapidly at regular intervals for approximately 1 minute, then flashes at irregular intervals: Key code not recognised. Remove key and try again.
Programming
When
System malfunction: LED illuminates for 1 minute, then flashes at irregular intervals. Key(s) added or replaced.
NOTE: Replacement keys MUST have blue mark. Keys with red mark are NOT compatible with this system.
How
NOTE: Programming method using vehicle keys can be deactivated using diagnostic equipment.
Obtain 2 programmed keys (A and B). Insert key A into ignition switch. Turn ignition switch to position II. Wait 1 second. Switch ignition OFF. Remove key A. Insert key B into ignition switch within 5 seconds. Turn ignition switch to position II. Wait 1 second. Switch ignition OFF. Remove key B. Within 10 seconds: Insert key to be programmed into ignition switch. Turn ignition switch to position II. Wait 4 seconds. Switch ignition OFF. Wait 5 seconds. Start engine. If engine does not start and clock LED flashes: Switch ignition ON. Wait at least 20 seconds. Switch ignition OFF. Repeat programming procedure. Repeat above procedure to program remaining keys. Keys can also be programmed using diagnostic equipment

Mar 08, 2010 | 2000 Ford Focus

1 Answer

2001 freelander new battery but car wont start on key all lights come on on the dash but nothing happens wont turn over


It sounds like this could be an immobilizer problem, if the red alarm LED is permanently on when you have the ignition is on this is defiantly the problem. You will need to get the key/fob reprogrammed to overcome this.

Dec 14, 2009 | 2003 Land Rover Freelander

1 Answer

2000 Toyota Corolla wont start Changed 02 sensor disconnected bat


I had the same problem, i had to remove the whole alarm system to get my car to start, when you unattatch the battery cables, the alarm notices the battery drain and sets the alarm off, i have no idea how much the dealership would charge for a new remote, but im sure its pricey, i would recommend just removing the alarm system, temporarily, until you can get a new remote. Good luck and god bless

Apr 17, 2009 | 1998 Toyota Corolla

Not finding what you are looking for?
2000 Chrysler Grand Voyager Logo

433 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...