1997 Jeep Grand Cherokee Logo
Posted on Feb 14, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How do I replace the passenger side corner light and front side turn signal light?

1 Answer

Greg Bernett

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Jeep Master 2,993 Answers
  • Posted on Feb 14, 2010
Greg Bernett
Jeep Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Mar 04, 2009
Answers
2993
Questions
1
Helped
2782716
Points
13428

Front Turn Signal & Parking Lights


How do I replace the passenger side corner light - 7ccc73e.gif
Remove the 2 parking light housing retaining screws ...


... then pull the housing away from the vehicle far enough to remove the bulb socket from behind the housing. Turn thHow do I replace the passenger side corner light - a323ae9.gifunterclockwise and pull


a323ae9.gif
Push the bulb in the socket gently and turn clockwise, then pull the bulb out of the socket. Note the offset retaining ears on each side of the bulb


  1. Remove the screws from the lens and separate the lens from the headlight bezel.
  2. Remove the headlight bezel.
  3. Remove the screws from the turn signal housing and pull it out.
  4. Turn the bulb socket counterclockwise 1/3 turn and remove it.
  5. Installation is the reverse of removal.


Side Marker Lights
  1. Remove the screws from the marker lens and separate the lens from the headlight bezel.
  2. Pull the bulb from its socket in the back of the lens.
  3. Installation is the reverse of removal.

5 Related Answers

jfirebird71

  • 335 Answers
  • Posted on Apr 08, 2009

SOURCE: 2000 sunbird front turn signal bulb

only i could replace mine where to remove clips from the black wheel well cover then the light bulb un screws from the back of the lens

Ad

Anonymous

  • 25 Answers
  • Posted on May 09, 2009

SOURCE: front driver side turn signal light doesn't flash

replace flasher......usually located in fuse block area...listen in this area....select passenger side ...then select driver side...you can hear flasher clicking...you have seperate flashers for each...FLASHERS are small cubes plugged into fuse block....probable bad driverside flasher

roniecon

Ronny Bennett Sr.

  • 6988 Answers
  • Posted on Jul 09, 2009

SOURCE: 2001 Mercury Cougar turn signal light bulb

3057 bulb

Jonah Oneal

  • 14092 Answers
  • Posted on Dec 14, 2009

SOURCE: tail lights work on both sides. turn signal and

check fuse to driver side turn signal lamp.check brake light bulb or replace bulb on driver side.also replace the front driver side turn signal bulb that is flashing fast.

Anonymous

  • 4 Answers
  • Posted on Apr 19, 2010

SOURCE: Right Turn Signal not flashing.

quick fix,try to run jumper wire from solid lime green wire to tail light green/orange wire Your problem is no power

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

2005 Saturn Ion front passenger turn signal not working

Did you replace the bulb in the passenger side running light/turn signal socket? There are two filaments in that bulb, one for the running light (which you indicate works) and one for the turn signal. If that bulb (filament) is burned out, it will make the turn signal flash faster. I don't know why you were swapping headlights, don't know where the fire box under the hood is, and don't know what a jumper sore is, so can't help you any further. I have a Saturn Ion, and have never found a fire box or jumper sore in it.
0helpful
1answer

1994 Toyota corolla 1.8, how do I get my passenger front turn signals to work? What wires have to be connected together for my turn signal and side corner marker to work?

does your car have the signal light flasher if so find it and replace it also check the fuses maybe both sides are fused separate
1helpful
1answer

Passenger side front turn signal/DRL do not work.

Dear Alex,
The problem is in the bulb, or the socket, or the wiring to these.
Whenever a turn signal flashes fast, know that one of the bulbs is not working.
You have already identified the problem as being the front one. Problem could be the hot wire, or the ground wire, or the ground connection to this bulb.
Start by taking a tester to the hot wire, and see if it is receiving electrical impulses when the turn signal is on.
( It probably is, unless the car has been in a wreck and has been improperly repaired.)
Then check the socket or the wires to is and see if the bulb is grounded.
I suspect the ground is defective, and either a new socket or a repair to the ground wire should fix you rights up.
God bless your efforts.
1helpful
1answer

How to replace passenger turn signal bulb

The side marker light must be removed in order to get at the turn signal light.
There are two screws holding the side marker light which is situated above the turn signal.
Open the hood.
Remove the phillips head screw at the top of the side marker light.
Using a long #2 Phillips screwdriver, remove the screw on the outside of the side marker light. This can be seen by looking between the lower side of the side marker light and the top side of the turn signal.
The side marker can be moved.
The turn signal has one screw on the top of the fixture that must be removed.
Slide out the turn signal fixture. There is a small feature on the lower front corner of the turn signal fixture that you must note to properly reinstall the turn signal.
In order to get to the bulb, rotate the bulb socket 1/4 turn CW or CCW. The bulb socket is loose.
The bulb is simply pressed into the socket.
Not sure of the type, but it can be found at your locale auto parts store.
The bulb is used in several places on the 1994 GC, so get apacket with two, if possible.
Assembly in reverse. Be careful not to overtighten the screws as they are replaced
0helpful
1answer

How do I replace the frong corner light on my 1993 Grand Cherokee passenger side? I found one screw at the top and took it out still would not budge. Is there another screw someplace else I'm missing?...

If you are talking about the turn signal, there is a second screw located between the bottom of the side marker light and the top of the turn signal light. You will need a long #2 screwdriver to get at the screw. You also may need to pry apart the two light fixtures to see the screw.
There is one screw holding the turn signal in place.

Pay attention to the little protrusion at the front side of the turn signal fixture. It needs to be placed behind the matching fixture near the side of the headlight.
0helpful
2answers

Tail lights work on both sides. turn signal and

Sounds like you need to replace the drivers brake/tail light.
0helpful
1answer

Right Turn Signal not flashing.

quick fix,try to run jumper wire from solid lime green wire to tail light green/orange wire Your problem is no power
0helpful
1answer

Right turn signal not working on 1992 Ford Explorer Truck

turn on the hazard light so you can identify the bulb that is actually deffective. the procedure to replace can be found on youtube.
Not finding what you are looking for?

540 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...