Question about 2005 Hyundai Accent

1 Answer

How do I turn off the service engine code in my 2005 hyundai accent ..code p2096

Posted by on

  • silver top May 11, 2010

    hi from uk may i suggest not just for the purpose of turning service light off but for any more code /engine faults you may have in future ? you can purchase off e bay an obd dignosis reader cheaply that i personally found ideal and simle for the diy er tou use it is CAN OBD2 U 480 it is on garage tools/equipment there are various obd models but this one will do hyundai as well as others they are approx £34 in uk and comes with full instuction how to use and code book and you can also help others/mates/family ? at least using obd for diagnosis ?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 67 Answers

The code.... P2096.... Post Catalyst Fuel Trim System Too Lean, Bank 2... If this has been repaired you can turn off the light with a scanner tool.....

Posted on Feb 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Hyundai Accent Check Engine Light


Did you reset?fill up a tank and reset, and see what happen.

Aug 23, 2016 | 2005 Hyundai Accent

1 Answer

P2096


Hi there:
DTC P2096 - Post Catalyst Fuel Trim System Too Lean (Bank 1)

Lean mixture code could be caused by a leakage in the rubber boot that is between the throttle body (similar to a carburetor) and the air cleaner housing. Following are all the tests to be done for a vehicle other than yours... HERE.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jul 11, 2012 | 2005 Hyundai Accent

1 Answer

2005 Hyundai accent won't start. it turns over but is not starting.


You'll have to figure out if it is a fuel or ignition problem.
Check and see if you are getting spark to the plugs first.
Also re-check the computer for codes and see how many are back.
Trouble codes are suggestions, not solid instructions.

Jun 28, 2012 | 2005 Hyundai Accent

1 Answer

Check engine light on code reads p2096 what


Fuel trim too lean. Usually means vacuum leak. Look for crushed,broken or melted off vacuum hoses near intake manifold. Or an obvious hissing noise at a normal idle. If so replace or repair clear codes your done. If not obvious take carb cleaner spray with nozzle attached car running & go over all vacuum hoses,intake manifold,egr valve see if idle raises if so you found leak. Repair. Could also be bad oxygen sensor switching bad o2 sensor but rarely.

Jun 06, 2010 | Hyundai Motor 2004 Accent

2 Answers

Check engine light comes on. odb2 code P2096 What does it mean


WHAT EXACTLY MEANS THE CODE P2096 AND HOW I SHOULD FIX IT CRYSLER 300 2010

Apr 24, 2010 | 2005 Chrysler Town & Country

1 Answer

Hyundai code P2096


Post catalyst fuel trim too lean. You can get this if youre running your vehicle on LPG fuel.

Mar 13, 2010 | 2005 Hyundai Accent

1 Answer

What the heck does a P2096 DTC mean on a 2004 Hyundai Accent?


P2096 - Post Catalyst Fuel Trim System Low Limit.

Possible Causes
EXHAUST LEAK
ENGINE MECHANICAL PROBLEM
1/2 O2 SENSOR2.gif
(K141) O2 SENSOR 1/2 SIGNAL CIRCUIT
(K299) O2 1/2 HEATER CONTROL CIRCUIT
(K904) O2 DOWNSTREAM RETURN CIRCUIT
FUEL CONTAMINATION

Jul 26, 2009 | Hyundai Motor 2004 Accent

1 Answer

04 hyndi accent GL with code returned


P2096
Signal Delay Time for Oxygen Sensor Ageing Limit
Diagnosis conditions
• Oxygen sensing after TWC is active
• No secondary air
• No diagnosis of secondary air system
• EVAP canister not highly loaded
• No faults in memory
Possible fault cause
♦ Oxygen sensor

Feb 10, 2009 | Hyundai Motor 2004 Accent

Not finding what you are looking for?
Cars & Trucks Logo

1,280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85111 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...