What is the firing order of the wires that go from the spark plugs to the coil pack or distrobuter for a 1988 4 cylinder chevy corsica

Here is the firing order and spark plug wire routing diagram for a 2006 Chevy Impala LT 3.9 V6:
Firing order: 1-2-3-4-5-6
Spark plug wire routing (starting from the driver's side):

• Cylinder 1: connect to the coil tower closest to the driver's side headlight
• Cylinder 3: connect to the coil tower next to cylinder 1
• Cylinder 5: connect to the coil tower next to cylinder 3
• Cylinder 2: connect to the coil tower closest to the passenger side headlight
• Cylinder 4: connect to the coil tower next to cylinder 2
• Cylinder 6: connect to the coil tower next to cylinder 4

Note: Make sure to route the wires properly to avoid cross-firing.

you can get guide from many sites.. i know few
error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thing is covered
within seconds u can get the access and it's totally illustrative complete

theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

For spark plug problem,click the help links provided below :---Car has no spark?http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html
------------How to Replace Spark Plugs?http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html
-------------Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------
The spark plug firing order for car?http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html
----------How to gap spark plug ?http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html-----------Spark plug Replacing for?http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html
-----------How to identify number one spark plug on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html
---------How does the spark plug wire go on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html
---------Spark plug Firing Order Diagram?http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html
-----------This will help.Thanks.

the firing order is 1-2-3-4-5-6

As you standing in front of the vehicle

the coils from left to right are 1-4-6-3-2-5

the rear cylinders from left to right are 1-3-5

the front cylinders are 2-4-6.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Firing order is 1, 5, 3, 6, 2, 4. Number 1 cylinder is up front. Why would you need the firing order, this engine does not have plug wires, each plug has its own coil pack, each coil pack is controlled by the computer.

This is a quick explanation:

1996 Dodge Caravan
3.3 liter




The big rectangles are referencing the engine, the cylinder associated to it's "firing" are the colored circles, and the are also the location of the spark plugs....the smaller lego-looking block is your coil pack. The spark plug wires run from the coil pack to the spark plug on the engine. The wires match 1 to1 or black to black...and so on....

When these are matched to each cylinder/spark plug and it's wire leading to the matching coil pack position, this is it's "firing order". If one of the wires is "crossed" meaning, not 1 going to 1, then the engine will "miss-fire".

check your coil packs that go over ur spark plugs

2 different 3.8's for that. Will send other picture as well, you pick what you have.

WET PLUD W/GOOD COMPRESSION IS USUALLY NO SPARK.YOUR ENGINE HAS 3 IGNITION COILS.EACH COIL CONTROLS 2 SPARK PLUGS.TRACE THE WIRES FROM THE BAD SPUGS BACK TO THE COILS .IF THEY ARE THE SAME COIL THEN U HAVE A BAD ONE OR CONTROL MODULE(UNDER COIL)