At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://www.startmycar.com > ... > Fuse box
The 2008 Jeep Grand Cherokee has 3 different fuse boxes: ... Jeep Grand Cherokee fuse box diagrams change across years, pick the right year of your vehicle:.
For 2004 Jeep Grand Cherokee
The owner's manuals and guides for vehicles with a model year of 2004 and below are available through TechAuthority® by FCA US LLC. Extra charges may apply.
? 0:55
www.youtube.com/watch?v=sDFLuenx9aw
Nov 14, 2012 - Uploaded by Freedomautomotive1
1998 ATC Jeep Grand Cherokee Blower Resistor connector Repair Kit (RARE 1/2 Year) ... How to Fix a Chrysler Blower FanThat Only Works on High - Duration: 16:51. ... JEEP2001 FIXING THE HEATER BLOWER CONTROL. ... Jeep Grand CherokeeCenter and Lower Dash Removal - Auto Repair Series ...
Good chance your blower motor comes out from the engine side of the firewall. located on the passenger side near but below the hood hinge (on firewall). You may need to remove a few items or move them in order to get to it but it's easier than removing the heater box. I suggest you run a hot lead to it and see if it comes on first though to make sure its not a switch, relay, resistor or blown fuse causing the problem.
My 2004 Jeep Grand Cherokee limiteds heater only works sometimes. I pulled it out to find one of the wires was not attached and the terminal looks burnt. Can I bypass
You've probably solved your problem by now but if not, you really need to buy a cheap digital multimeter. It will help you in this kind of situation and others.
Connecting it between the output side of the fuse for that circuit and ground can let you start pulling connectors until the low resistance causing the blown fuses goes away.
Experience with this kind of troubleshooting helps so you may be a little uncertain at first.
They can be had at auto-parts stores, Radio Shack, or if you are lucky enough to have a Harbor Freight tool store near you, they often have the things for $3 and while not exactly precision instruments, they are adequate for most anything one can do at home.
×