How to fit a fuel pump to a 1993 toyota camry wagon 4 cyl

i owned the 1995 4 cyl wide body camry till the cooling system failed in heavy traffic and over heat stripped out the head bolt threads in the block

the toyota camry engine designation is a 5S-FE

water pump is driven by timing belt
behind timing belt covers
they have to be removed to get to the water pump

normally timing belt, seals ,tension er pully and water pump are replaced at the same time ..comes in a kit

i dont have the 5S-FE cooling system hot under pressure specs

so I cant answer which inline electric pump pressure is required to work on the 5S-FE


engine repair manual free download pdf
5S-FE 431 pages
http://www.turboninjas.com/camry/eg1.pdf
ENGINE MECHANICAL to page 144
EMISSION CONTROL SYSTEMS
MFI/SFI SYSTEM page 164
COOLING SYSTEM page 238
LUBRICATION SYSTEM page 268
DIAGNOSIS SYSTEM page 296
CIRCUIT INSPECTION page 336
water pump as a part

timing belt water pump kit
water pump
,location on the engine with timing covers removed

General Toyota Camry workshop manual here

http://www.turboninjas.com/camry/

eg1.pdf is the file for your engine

i would start buy checking you disturber see if you have spark when it dies

Yes . Remove fuel tank and access is through fuel sending unit at top.

lift the bonnet and count them
there will be 2 under the engine one at the front and 2 at the top at the ends of a rod

I saw this DIY site on how to replace the fuel pump of the 1992 Toyota Camry. This solution can be used in all vehicle types.

http://www.automd.com/62/how-to-replace-a-fuel-pump/

the fuel pump is electric and is located inside the gas tank, this is true of all toyota's

The fuel pump is located in the fuel tank and it can be reached by removing the back seat of the car.

be sure to get a fuel pump of the same rating with the one you are replacing.

Good luck.

its in the kik down cable its sticking

The fuel pump is in the fuel tank.